2016 in Review

In retrospect, I will remember 2016 as the year that I discovered operations.

I knew early on that I wanted to build the layout so that it would be more than a railfanning concept and could eventually grow (with me) into full operations. But I had no idea what that practically meant. Like most things, reading about it theoretically wasn’t doing it for me – I really needed to see it and experience it.

This year I got to operate on four very different layouts, each of which was a complete joy and all of them have informed my thinking and have contributed to the evolution of my trackplan.

IMG_1441

First up, was the N scale Grand Trunk Southern layout of John Johnson (CARM founder and Canadian editor, above) in Hamilton, ON.  You can read all about it at the blog post here.

IMG_1333

Then in  June, I was invited to operate on Sheldon Frankel’s fantastic Quebec & New England layout. I first discovered the Q&NE on Sheldon’s YouTube channel and was amazed to learn that this was a local layout. I have since become a regular monthly operator on the Q&NE and very much enjoy being part of an operating group.

ops-2016-08-17-01_zpsmp4nv9om

Trevor Marshall, who I met at the Copetown Show this year, invited me over to operate on his S scale Port Rowan in 1:64 and blogged about it here. I had listened to Trevor on his podcast, The Model Railway Show, watched him on trainmasters.tv and was an avid follower of his blog. This was another layout that I was on my ‘TOP 10 to visit’ list!

img_1919

Finally, I had the pleasure to be a guest operator on the Waterloo Region Model Railroad Club. I was invited by Chris van der Heide because he knew of my interest in learning more about OCS operations.

 

In addition to being a ton of fun, I learned something from each of these experiences. A little bit of each of these layouts will make it into my trackplan and operating concept.

Which beings me to the second theme of 2016… the year that I ‘finalized’ my trackplan. I was really struggling with the trackplan and had actually thought about soliciting some professional help and purchasing some design services. Like most things, a number of people/factors came together to break the logjam.

After watching Bill Beranek, The Track Planner’s excellent Operations presentation on the YouTube Model Builders channel, I became very interested in the AnyRail track planning software. It was fun, easy and finally I was able to try out ideas and really see what would work!

This got me to a trackplan – good but not great. Many thanks to Sheldon Frankel, who in addition to being the owner of the Q&NE is a professional civil engineer and happens to have worked for the railways. No better person to take my previous mess and clean it up with some good, practical, prototypical track design. You can view the revised track plan as a more detailed PDF here.

The final theme of 2016 is friendships. None of the above would have been possible without the friendship of some pretty incredible people.

Being located in Toronto, ON means that I am lucky to be surrounded by hundreds of fantastic modellers and their layouts. I’ve said it before, but I am constantly amazed how generous this community is with their time and encouragement and I have had the good fortune of learning from some of the best. Thank you.

 

Advertisements

Have you ever smashed a model?

marysville1

I mean really trashed it.

And not to recreate a prototype photo or to model an effect. Have you ever been soooo FRUSTRATED that something wasn’t working out the way that you wanted it to, that you just said ‘F*%K-IT‘ and smash…you destroyed it? I admit it, I have.

If by some super-human feat of self-control you have not, I bet you’ve been close and wanted to.

But here’s the thing. I don’t feel that way anymore. And I have the hobby of model railroading, in part, to thank for that.

This is a hobby for patient people. I’ve learned that projects can’t be rushed, steps need to be followed in logical and methodical, well thought out order, or mistakes happen. First fill, then wait, then sand and wait, then prime and let dry, then paint one thin coat and let dry, then repeat… dear God can’t I get this done TONIGHT? And when I inevitably do try to shortcut the process, and the model gets ruined, I have a choice. Trash it or fit it.

Funny thing is that it can almost always be fixed. And fixing the mistake is sooo satisfying. I really enjoy the feeling of working through the fix and coming out the backend with something, that in some cases, is even better than the original.

And for those unlucky models that don’t quite work out, as the pic above shows, there is always a creative and prototypical way to use those rejects on the layout.

This might just be the beginning of a series of blog posts titled, ‘Lessons I’ve Learned from the Hobby‘.